Case Study - Commercial Entry-Foyer Lighting Rectification

Rewiring Circuits and Installing New LED Downlights

Canny Electrics resolved one commercial entry-lighting fault in South Melbourne after discovering the foyer downlights had no power and no existing wiring connected to them at all.

The project combined electrical fault finding, a new cable run, a new light switch, and new LED downlights to restore safe illumination to the shop entry.

The result was a properly functioning foyer lighting system that removed a safety risk and gave staff direct control from behind the main counter.

image
  • Client Type: Commercial strata property / owners corporation management
  • Industry: Commercial / retail tenancy / strata-managed property
  • Location: South Melbourne
  • Project Date: 19/03/2024
  • Project Type: Electrical fault finding and entry-lighting rectification
  • Property Type: Commercial strata property
  • Trigger for Project: Entry foyer lights at a shop were not working, leaving the area dark and creating a safety concern
  • Primary Services: Electrical diagnostics, circuit testing, lighting replacement, cable installation, switch installation
  • Technology Stack: LED downlights, new electrical cable, new light switch
  • Safety Issue: People were navigating a dark entry area with no working foyer lighting
  • Company: Canny Electrics

The Challenge

The entry foyer lights at the shop were not working, which meant customers and staff were moving through a dark access area. Because the site was a commercial property under strata management, the issue created both a practical disruption and a clear safety concern.

The main technical challenge was diagnosing why the entry foyer downlights had no power. During testing, it became clear that the problem was more fundamental than a faulty fitting. The lights had never actually been properly connected, with no wiring running to the downlights at all.

This meant the solution required more than replacement fittings. Canny Electrics needed to create a working circuit by installing a new cable from a suitable power source and adding a practical switch location for staff.

The Solution

Canny Electrics delivered a full lighting rectification with the following scope:

  • Tested all lighting circuits associated with the foyer issue
  • Confirmed there was no power to the entry foyer downlights
  • Identified that there was no existing wiring running to the foyer downlights
  • Replaced the entry foyer lights with new LED downlights
  • Installed 1 new cable from a power source to the foyer lighting
  • Installed 1 new light switch behind the main shop counter
  • Restored safe and controllable lighting to the entry area

Key implementation entities:

  • Lighting circuit fault finding
  • New cable and light switch installation
  • LED downlight installation
  • Entry foyer safety improvement

The Results

  • 1 entry-foyer lighting fault diagnosed and rectified
  • 0 existing connected wiring found to the original foyer lights
  • 1 new cable installed to power the foyer lighting
  • 1 new light switch installed behind the main counter
  • New LED downlights installed in the entry foyer
  • Full illumination restored to the dark entry area

Summary

  • Canny Electrics completed fault finding on non-working foyer lights in a commercial property in South Melbourne.
  • Testing showed the foyer downlights had no power because there was no existing wiring connected to them.
  • The lights were replaced with new LED downlights and a new cable was run from a power source.
  • A new light switch was installed behind the main shop counter for staff control.
  • The final result was a fully illuminated entry foyer with improved safety.

Need an Electrical Fault Expert?

If your commercial property has persistent lighting issues or safety concerns, our team specialises in deep diagnostics and efficient rectifications.

Testimonials

What our customers are saying about us

Call Now Button